3003 / 3103 Internally Enhanced Round Tube / Aluminum Inner Grooved
Tube
Product Description:
The Aluminum Inner Grooved Tube is following a helical pattern and
have been optimized to improve heat transfer. The improvement in
heat transfer coefficient of the tube is two times what can be
achieved with
traditional smooth bore tubes3. This increased efficiency can help
achieve a more compact design of the heat exchangers and a
reduction in refrigerant load. different grooves depth and geometry
satisfy the specific regional requirements and refrigerants in use.
Parameter for Aluminum Inner Grooved Tube
| Specification | bottom wall thickness | Tooth height | Tooth number | Helix Angle | Rib-top Angle | g/m |
| φ7mm | 0.4-0.5 | 0.05-0.18 | 40-50 | 18° | 50° | 28+/-3 |
| φ9.52mm | 0.45-0.55 | 0.05-0.18 | 45-55 | 18° | 50° | 45+/-3 |
| φ7.94mm | 0.4-0.5 | 0.05-0.18 | 40-50 | 18° | 50° | 40+/-3 |
The parameters in above form can also be adjusted as per customer's
request.
Tensile:120MPa min
Elongation:35% min
Expanding:40% min
Density:2.7
Application:Air-conditioner heat exchanger system
Product feature:
1. Light-weight
2. Good thermal conductivity properties and electrical conductivity
3. Good corrosion resistance
4. Good forming and bending properties
5. High recycling value
6. Small deviation range
7. High surface quality
Production time:15-20 working days
Features
1. Insulation shield for cable; It can be used for protecting the
high frequency transmission of telecommunication cable; power cable
and electric wire from the interference of electromagnetic and
radio wave;
2. Copper foil are widely used for coaxial cable shield and
electronic product like EHV cables and RF cables; shielding layer
of many other kinds cables;telephone lines and ventilation ducts,
etc;
3. Electromagnetic interference shielding;isolate electromagnetic
waves to prevent damage to the human
4. Good insulativity and shielding effectiveness to reduce
attenuation;avoid the voltage or current influence function;
5. Good thermal insulation; waterproof; cold resistance;Easy to
peel; stick force resistance;
FAQ:
1, Q: Are you manufacturer?
A: Yes, we are established in 2003. As a manufacturer our customers
are welcome to visit our factory.
2, Q: Do you accept customized orders?
A: Yes, we do. Your customized orders are always welcomed. Please
kindly offer us your technical perfrmances or samples so that we
can customize the products according to your preferences. About any
further detail, please feel free to contact us.
3. Q: How can I get one quotation faster?
A: Pls offer details about your demands as more as
possible,insulation thickness,over diameter,nominal voltage,working
temperature,color,quantity,application,etc.
