1050 Micro Channel Parallel Flow Aluminium Flat Tubes
1050 Micro Channel Parallel Flow Aluminium Flat Tubes also called multi-port extrusion, this flat and rectangular extruded
tube is made of several channels that increase the heat transfer
through a higher surface per volume ratio.
Micro-channel tubes are available in various sizes and alloys,
ensuring the best properties for the purpose required, and can be
delivered with a coating, ready for assembly and oven brazing.
| Item | Catagory | Range |
| 1 | Fixed Length | 200-4000mm |
| 2 | Width | 8mm-60mm |
| 3 | Thickness | 1mm-4mm |
| 4 | Wall Thickness | 0.15mm-0.6mm |
| 5 | Thickness of zinc spraying | 5g/mm-15g/mm |
| 6 | Thickness of solder layer | 8g/mm-25g/mm |
Micro Channel Tube Application:
1) Auto car air conditioner,condenser and evaporator.
2) In the field of commercial: such as household air conditioner, condenser, evaporator, fridge,
oil cooler and inter cooler
Chemical Composition
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤ 0.25 | ≤ 0.40 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | - | ≤ 0.05 | ≤ 0.05 | ≤ 0.03 |
| 2 | 1100 | ≤ 0.95(Fe+Si) | 0.05-0.20 | ≤ 0.05 | - | - | ≤ 0.10 | - | - |
| 3 | 1197 | ≤ 0.15 | ≤ 0.20 | 0.40-0.55 | 0.10-0.20 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
| 4 | 3102 | ≤ 0.40 | ≤ 0.70 | ≤ 0.10 | 0.05-0.40 | - | - | ≤ 0.30 | - | ≤ 0.10 |
| 5 | 3R03 | ≤ 0.15 | ≤ 0.15 | ≤ 0.01 | 0.90-1.10 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05
|
What can we do for you ?
1-Micro-channel heat exchangers: If you are looking to maximize the
competitive advantages of an all-aluminium heat exchanger, then
brazed micro-channel heat exchangers are for you.
2-Precision tubes: With over 10 years of experience supplying the
automotive and the HVAC&R industries, Trumony clear market
leader in the field of providing aluminium solutions for heat
transfer applications.
3-Aluminium for thermal management : You can now order coolers with
long, thin fins. This is the base for a range of competitive
cooling solutions that use aluminium.
