8006/8011 Brazed Aluminum Cladding Foil for Heat Exchangers
Condenser
Aluminum foil is a special material for the manufacture of heat
exchanger fins for air conditioners. The air-conditioning foil used
in the early days was plain foil. In order to improve the surface
properties of plain foil, anti-corrosion inorganic coating and
hydrophilic organic coating are applied before forming to form
hydrophilic foil.
Specification:
1) Alloy 8011 1145, 1235
2) Thickness: 0.008-0.2mm
3) Width Size: 200mm-1250mm
4) Customer's specification is welcomed
5) Coating: Bare aluminum foil, hydrophilic aluminum foil, epoxy
aluminum foil.
Characteristic:
Tensile strength(MIN): 50 Mpa
Breaking elongation(MIN): 15%
Bond strength(MIN): 4 N/cm
Appearance: Blue or natural color, Very smooth, Non-knife-cut mark.
Usage: Used for waterproof layer and shield layer.
| Aluminium coil/Aluminium Strip |
| Aluminium Alloy | Thickness (mm) | Width (mm) | Temper |
| A8011 | 0.2-500 | 20-2500 | O,H12,H14,H16,H18,H22,H24,H26 |
| Material process | both CC AND DC |
| Customerize size | Size can be produced as per clients requirement |
| Surface | Mill finish ,Color coated(PVDF& PE),Stucco Embossed ,Bright Polish
,Anodizing |
| Mirror, Brush, Perforated, Tread plate,Corrugated etc |
| Quality Standard | ASTM B209,EN573-1 |
| MOQ per size | 2 tons |
| Payment Terms | TT OR LC OR DP at sight |
| Delivery time | Within 25 days after receipt the lc or deposit |
| Material Quality | tension levelled,Free of defects like oil stain,Roll
Marks,Waves,Dents, Scratch etc , |
| A+++ quality |
| Application | Construction ,Building, ACP, Decoration, Roofing, Mould, Ship
Building, Lighting, |
| Aircraft, Oil Tank ,Truck Body, car body, TFT |
| Packing | Standard export worthy wooden pallets, and standard packing is
about 2.5 tons/pallet |
| coil ID:508MM |
| coil weight also can be as per client's requirement from 50kgs to
8000 kgs per coil |
Packing:
1) Plastic drum.
2) According to the customer's demand.
FAQ:
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years history in this
industry.
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples
(within 5 kg),;after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
