Product name:Titanium Aluminum Metal Composite Material For Heat
Conduction Industry
We can customize R&D and produce multilayer metal composite
materials with different combinations and proportions,which can
achieve 1-8 series aluminum alloys and copper,steel,stainless
steel, titanium, nickel and other metal composites, we can develop
aluminum-based, steel-based, copper based and other series of metal
composite materials for customers.
At present, the company's leading products are
copper-aluminum,steel-copper,aluminum-steel, aluminum-copper,
aluminum-titanium, and other metal composite materials; product
specifications include plate, strip, and foil series. Product
specifications: (0.03-10) mm x (20 -1050) mm.
The production design has an annual output of 30,000 tons of
composite materials. The main equipment is 2 1650 hot-dip
continuous casting and rolling,1250mm,650mm2,215050/1650 cold
rolling mills, 8 hood annealing furnaces, 2 continuous heating and
annealing furnaces pull-bend straightening, Cross sliing machine,
washing machine and other ancillary equipment.
Our products are widely used in new energy vehicle batteries, 5G
mobile communications, kitchen utensils (IH rice cookers,
high-conductivity stainless steel woks, etc.), photovoltaics, LEDs,
electronics, and construction.
Product description: Titanium Aluminum Cladding Strip
Oxide film on the surface of titanium aluminum plate is a good
wear-resistant layer with good conductivity of aluminum,and its
service life is three times of aluminum plate and copper plate. The
product has the advantages of good corrosion resistance,high heat
transfer efficiency,and long service life,smooth surface without
scaling layer, small density and high strength.
Application Fields:
Cathode plate of electrolytic copper, zinc, manganese and lead;
heat conduction industry (plate heat exchanger, etc.); anti-
corrosion industry (anti-corrosion contain- er, ship, etc.);
decoration industry; kitchen utensils, etc.
Specification:
| Model | Specification |
| Ti/1060/Ti | Total thickness(g/m3) | Single/double copper layer thickness(%) | Width(mm) | Length(mm) |
| 0.5-1.0 | 6-10 | 400-1000 | 500-8000 |
| Physical property | Mechanical property |
| Density(g/m3) | Conductivity(m/Ω.mm2) | Tensile strength(MPa) | Elongation(%) | Peel strength(N/mm) |
| 2.8-3.0 | 0.0342 | 110 minimum | 15 minimum | 20 minimum |
First class testing equipment:
The laboratory is equipped with metallographic microscope, direct
reading spectrometer, universal tensile sample machine, salt spray
test box, transmission electron microscope, peel tester, hardness
tester, atom probe and other equipment.
Production equipment:
650mm Rolling mill
Bell Type Annealing Furnace
1250mm Rolling Mill
Oxygen-free Hot-plating Continuous Casting and Rolling Production
Line
