Processing aluminum fitting connector for new energy vehicle
cooling tube 3003 nozzle
1. Product Introduction:We are a professional battery pack heat exchanger manufacturer.
Our company designs, makes and distributes heat exchangers for
battery packs, which carrying cylindrical cells, prismatic cells or
pouches.
We have full solutions about cooling the battery cells, for example
snake tubes for cylindrical cells (18650,21700); water cooling
plate for prismatic cells, and plate channel for pouches.
We do hope to utilize our expertise to have chance to establish
long-term cooperation with you , as battery thermal management is
very critical in an operation of EV. Here are a few things we are
good at:
1. Tooling development — we do it in house, so we can make initial
testing prompt and accurate.
2. Making all kinds of heat exchangers — we can do customized
shape, to make the parts fit into different packs.
3. Assistance in parts design — we have experienced engineer team,
they can provide professional suggestions regarding feasibility of
carrying out new designs.
4. One station service — we can do heat exchangers, as well as its
related insulation and silicon pad. So client can get
integrated solution.
2. Commonly used material chemical composition:
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 2 | 1100 | ≤0.95(Si+Fe) | 0.05-0.20 | ≤0.05 | --- | --- | ≤0.10 | --- | --- |
| 3 | 3102 | ≤0.40 | ≤0.70 | ≤0.10 | 0.05-0.40 | --- | --- | ≤0.30 | --- | ≤0.10 |
| 4 | 3003 | ≤0.15 | ≤0.15 | ≤0.01 | 0.90-1.10 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.05 | ≤0.05 |
Both 3003 and 3102 are the alloys with very good anti-corrosion
property,so they are widely used for heat exchange.
3. Supply state and mechanical properties:
| Alloy | Temper | Tensile Strength | Yield Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥20MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥20MPa | ≥25%
|
4. Application:
The end plate can be used in various applications, such as new
energy vehicles (cylindrical battery, prismatic battery, soft
packing battery), solar panels, solar energy collectors,
photovoltaic power generation collectors, superconducting plates,
soaking plates and temperature uniforming plates. Here are some
examples for your reference.
5. Products for your reference:
Include: Cylindrical Battery Thermal Management,
Square Battery Thermal Management,
Electric Thermal Management,
All Aluminum Liquid Cooling Tray,
Soft Packing Battery Thermal Management and Motor Thermal
Management.
6. FAQ:
Q: Are you a trading company or manufacturer?
A: We're actually a manufacturer with over 10 years of experience
in this industry.
Q: What are your payment terms?
A: Normally, we require 30% TT in advance and the balance to be
paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually, it will take around 15-20 days for new molds and free
samples (within 5 kg). After confirmation, mass production can be
completed within 25-30 days.
Q: Do you offer OEM/ODM services?
A: Absolutely! We can definitely provide those services.
Q: Can I get a sample from you?
A: Of course! It would be our pleasure to offer you samples for
quality check.
Q: Is it possible to place a sample order?
A: Yes, we do accept sample orders and even provide design
services!
